Wavecom G900 Uživatelský manuál stáhnout pdf (Strana 48)

Wavecom GSM Modem

This confidential document is the property of WAVECOM and may not be copied or circulated without permission

7.8. Default configuration Z

Restores the configuration profile.

Application to GSM ATZ

GSM to application OK command valid

7.9. DTE-DCE local flow control +IFC

This command is used to control the operation of local flow control

between the DTE and DCE.

AT+IFC=<DCE_by_DTE>,<DTE_by_DCE>

* < DCE_by_DTE > :

0 none not supported

1 Xon/Xoff local circuit 103 not supported

2 RTS supported

3 Xon/Xoff global on circuit 103 not supported

* < DTE_by_DCE > :

0 none not supported

1 Xon/Xoff circuit 104 not supported

2 CTS supported

Application to GSM AT+IFC?

GSM to application +IFC: 2,2

current values

Application to GSM AT+IFC=?

GSM to application +IFC: (0-3),(0-2)

possible values.

Application to GSM AT+IFC=0,0

GSM to application OK new values

7.10. Set DCD signal &C

This commands controls the Data Carrier Detect (DCD) signal.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 66 67

Žádné komentáře

Wavecom G900 Uživatelský manuál Strana 48